Epson WorkForce Pro WF-C879RBAM User Manual page 257

Solving Problems
Code Problem
104 Reverse printing has failed due to a lack of available
memory.
106 Cannot print from the computer due to the access
control settings.
107 User authentication failed. The job has been
canceled.
108 Confidential job data was deleted when the printer
was turned off.
109 The received fax was already deleted.
110 The job was printed on one side only because the
paper loaded does not support double sided
printing.
111 Available memory is running low.
120 Cannot communicate with the server that is
connected using an open platform.
201 The memory is full.
202 The line was disconnected by the recipient machine.
>
The Printer Does Not Work as Expected
>
Error Code is Displayed on the Status Menu
Solution
❏ Select Settings > General Settings > System
Administration > Clear Internal Memory Data
> PDL Font, Macro, and Working Area, and then
clear the fonts and the macros that you have
downloaded.
❏ If you want to print in reverse, try the following
methods to reduce the size of the print job.
❏ Lower the print quality and the
resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or
fonts used in the print job.
Contact your printer administrator.
❏ Make sure that the user name and password are
correct.
❏ Select Settings > General Settings > System
Administration > Security Settings > Access
Control. Enable the user restriction function, and
then allow the job without an authentication
information.
-
-
If you want to perform 2-sided printing, load paper
that supports 2-sided printing.
Try the methods below to reduce the size of the print
job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
Make sure there are no errors on the server or the
network.
❏ Print received faxes from Job Status in Job/
Status .
❏ Delete received faxes saved in the inbox from Job
Status in Job/Status.
❏ If you are sending a monochrome fax to a single
destination, you can send it by using Direct Send.
❏ Divide your originals in two or more to send them
in several batches.
Wait for a while and then try again.
257