Table of Contents
Advertisement
Administrator Information
❏ Overwrite: Erases all data with a dedicated erase command, and overwrites other data in all areas to erase all
data.
❏ Triple Overwrite: Erases all data with a dedicated erase command, and overwrites other data in all areas three
times to erase all data.
Making Settings for Sequential Deletion
Note:
You can also make settings from the device's control panel.
1. Access Web Config and select the Device Management > Stored Data.
2. Select ON for Sequential Deletion from Hard Disk.
3. Click OK.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&
Formatting the Internal Hard Disc
1. Select Settings on the home screen on the printer's control panel.
2. Select General Settings > System Administration > HDD Erase Settings.
3. Select Erase All Memory.
4. Select High Speed, Overwrite, or Triple Overwrite according to the purpose.
5. Select Yes on the confirmation screen.
Monitoring a Remote Printer
Checking Information for a Remote Printer
You can check the following information of the operating printer from Status by using Web Config.
❏ Product Status
Check the status, cloud service, product number, MAC address, etc.
❏ Network Status
Check the information of the network connection status, IP address, DNS server, etc.
❏ Usage Status
Check the first day of printings, printed pages, printing count for each language, scanning count, etc.
>
>
Managing the Printer
521
Monitoring a Remote Printer
Advertisement
Table of Contents
