Epson WorkForce Pro WF-C879RBAM User Manual page 565

Administrator Information
You can acquire the logs of each device and user in cooperation with the server, and configure restrictions on the
device and functions that can be used for each user and group. It can be used with Epson Print Admin (Epson
Authentication System) or a third-party authentication system.
If you connect an authentication device, you can also perform user authentication using the ID card.
Configuring Epson Open Platform
Enable Epson Open Platform so that you can use the device from the authentication system.
1. Access Web Config and then select the Epson Open Platform tab > Product Key or License Key.
2. Enter a value for each item.
❏ Serial Number
The serial number of the device is displayed.
❏ Epson Open Platform Version
Select the version of Epson Open Platform. The corresponding version varies depending on the
authentication system.
❏ Product Key or License Key
Enter the product key obtained from the dedicated Web site. See the Epson Open Platform manual for
details such as how to obtain the product key.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The printer is updated.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&
Configuring the Authentication Device
You can configure the authentication device used in the authentication system from the Device Management tab >
Card Reader.
For more information, see the manual of the authentication system.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&
>
Advanced Security Settings
565
>
Using Epson Open Platform