Table of Contents
Advertisement
Administrator Information
3. Select the device you want to configure from the device list.
4. Click Device Configuration on the Home tab on the ribbon menu.
When the administrator password has been set, enter the password and click OK.
5. Click Common > Contacts.
6. Click Browse on Import.
7. Select the file you want to import and then click Open.
When you select the binary file, in Password enter the password you set when exporting the file.
8. Click Import.
The confirmation screen is displayed.
9. Click OK.
The validation result is displayed.
❏ Edit the information read
Click when you want to edit the information individually.
❏ Read more file
Click when you want to import multiple files.
10. Click Import, and then click OK on the import completion screen.
Return to the device's property screen.
11. Click Transmit.
12. Click OK on the confirmation message.
The settings are sent to the printer.
13. On the sending completion screen, click OK.
The printer's information is updated.
Open the contacts from Web Config or printer's control panel, and then check that the contact is updated.
Cooperation between the LDAP Server and Users
When cooperating with the LDAP server, you can use the address information registered to the LDAP server as the
destination of an email or fax.
Configuring the LDAP Server
To use the LDAP server information, register it on the printer.
1. Access the Web Config and select the Network tab > LDAP Server > Basic.
>
Settings to Use the Printer
480
>
Making Contacts Available
Advertisement
Table of Contents
