Table of Contents
Advertisement
Printing
>
Printing Photos
1. Connect the memory device to the printer's external interface USB port.
"Inserting an External USB Device" on page 48
2. Select Memory Device on the home screen.
3. Select JPEG.
4. Select the file, and then proceed to the next screen.
5. Tap
x
.
JPEG Settings
(Options) :
Make settings for ordering, selecting, and deselecting image data.
Basic Settings:
❏ Paper Setting
Specify the paper source settings which you want to print on.
❏ Color Mode
Select a color setting whether you normally print in B&W or Color.
Advanced:
❏ Layout
Select how to layout the JPEG files. 1-up is for printing one file per sheet. 20-up is for printing 20
files on one sheet. Index is for making index printing with information.
❏ Fit Frame
Select On to crop the image to fit into the selected print layout automatically. If the aspect ratio of
the image data and the paper size is different, the image is automatically enlarged or reduced so that
the short sides match the short sides of the paper. The long side of the image is cropped if it extends
beyond the long side of the paper. This feature may not work for panorama photos.
❏ Quality
Select Best for higher quality printing, but the printing speed may be slower.
❏ Date
Select the format of the date the photo was taken or saved. The date is not printed for some layouts.
❏ Fix Photo
Select this mode to improve the brightness, contrast, and saturation of the photo automatically. To
turn off automatic improvement, select Enhance Off.
❏ Fix Red-Eye
Select On to automatically fix the red-eye effect in photos. Corrections are not applied to the
original file, only to the printouts. Depending on the type of photo, parts of the image other than the
eyes may be corrected.
>
Printing JPEG Files from a Memory Device
96
Advertisement
Table of Contents
