Encrypted Communication Using Ipsec/Ip Filtering - Epson WorkForce Pro WF-C879RBAM User Manual

Administrator Information
2. Specify a certificate to use on Server Certificate.
❏ Self-signed Certificate
A self-signed certificate has been generated by the printer. If you do not obtain a CA-signed certificate,
select this.
❏ CA-signed Certificate
If you obtain and import a CA-signed certificate in advance, you can specify this.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The printer is updated.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&
"Configuring a CA-signed Certificate" on page 534
&
"Updating a Self-signed Certificate" on page 538
&

Encrypted Communication Using IPsec/IP Filtering

About IPsec/IP Filtering
You can filter traffic based on IP addresses, services, and port by using IPsec/IP Filtering function. By combining of
the filtering, you can configure the printer to accept or block specified clients and specified data. Additionally, you
can improve security level by using an IPsec.
Note:
Computers that run Windows Vista or later or Windows Server 2008 or later support IPsec.
Configuring Default Policy
To filter traffic, configure the default policy. The default policy applies to every user or group connecting to the
printer. For more fine-grained control over users and groups of users, configure group policies.
1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Basic.
2. Enter a value for each item.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The printer is updated.
>
Advanced Security Settings
541
>
Encrypted Communication Using IPsec/IP Filtering