Table of Contents
Advertisement
Product Information
Related Information
"Making the Printer Ready to Send and Receive Faxes" on page 490
&
"Making Settings for a PBX Phone System" on page 492
&
"Receiving Incoming Faxes" on page 143
&
"Making Settings for Blocking Junk Faxes" on page 501
&
Send Settings
You can find the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Send Settings
Note:
❏ On the Web Config screen, you can find the menu below.
Fax tab > Send Settings
❏ If a password entry screen is displayed, enter the password.
Auto Rotation:
An A4 size original placed in the ADF or on the scanner glass with its long edge facing to the left is
sent as an A3 size fax. Enable this to rotate the scanned image to send it at A4 size.
Quick memory send:
The quick memory send feature starts sending the fax when the printer finishes scanning the first
page. If you do not enable this feature, the printer starts sending after saving all of the scanned images
to memory. By using this feature, you can reduce the overall operation time as scanning and sending
are performed in parallel.
Batch Send:
When there are multiple faxes waiting to be sent to the same recipient, this groups them together to
send them at once. Up to five documents (up to 200 pages in total) can be sent at one time. This helps
you save on transmission costs by reducing the number of connection times.
Save Failure Data:
Saves documents that failed to be sent in the printer's memory. You can resend the documents from
the Job/Status.
Set Storage Period:
Storage Period
Wait Time for Next Original:
Set the time to wait for the next original. The printer starts sending the fax after the time has passed.
>
>
Settings Menu List
Password
Set a permission password in Password.
Printing: Allows printing the PDF file.
Editing: Allows editing the PDF file.
Set a period of days within which the printer will store the document that failed to send.
General Settings
390
Advertisement
Table of Contents
