Epson WorkForce Pro WF-C879RBAM User Manual page 277

Table of Contents

Solving Problems

Color correction has been applied.

When printing from the control panel or from the Windows printer driver, the Epson auto photo

adjustment setting is applied by default depending on the paper type. Try change the setting.

❏ Control panel

Change the Fix Photo setting from Auto to any other option. If changing the setting does not work,

select Enhance Off as the Fix Photo setting.

❏ Windows printer driver

On the More Options tab, select Custom in Color Correction, and then click Advanced. Change the

Scene Correction setting from Automatic to any other option. If changing the setting does not work,

use any color correction method other than PhotoEnhance in Color Management.

"JPEG Settings" on page 96

"Adjusting the Print Color" on page 72

The Position, Size, or Margins of the Printout Are Incorrect

The following causes can be considered.

The paper is loaded incorrectly.

Load paper in the correct direction, and slide the edge guide against the edge of the paper.

"Loading Paper" on page 39

The size of the paper is set incorrectly.

Select the appropriate paper size setting.

The margin setting in the application software is not within the print area.

Adjust the margin setting in the application so that it falls within the printable area.

"Printable Area" on page 408

Printing, Copying, Scanning, and Faxing Quality is Poor

Print Quality is Poor