Table of Contents
Advertisement
Scanning
>
Scanning Originals to the Cloud
❏ Frame:
Remove the shadows at the edge of the original.
❏ Center:
Remove the shadows of the binding margin of the booklet.
Remove Punch Holes:
Remove the punch holes that appear in the scanned image. You can specify the area to erase the
punch holes by entering a value in the box on the right.
❏ Erasing Position:
Select the position to remove the punch holes.
❏ Orientation (Original):
Select the orientation of the original.
Continuous Scan(ADF):
You can place a large number of originals in the ADF in batches, and scan them as a single scanning
job.
File Name:
❏ Filename Prefix:
Enter a prefix for the name of the images in alphanumeric characters and symbols.
❏ Add Date:
Add the date to the file name.
❏ Add Time:
Add the time to the file name.
Scanning Originals to the Cloud
Before using this feature, make settings using Epson Connect. See the following Epson Connect portal website for
details.
https://www.epsonconnect.com/
http://www.epsonconnect.eu
1. Place the originals.
"Placing Originals" on page 43
2. Select Scan > Cloud on the control panel.
3. Select
on the top of the screen, and then select a destination.
4. Make the scan settings.
"Basic Menu Options for Scanning to the Cloud" on page 123
"Advanced Menu Options for Scanning to the Cloud" on page 123
(Europe only)
122
Advertisement
Table of Contents
