Table of Contents
Advertisement
Administrator Information
Items
Wide-Area Bonjour
iBeacon Settings
Items
Enable iBeacon Transmission
SLP Settings
Items
Enable SLP
WSD Settings
Items
Enable WSD
Printing Timeout (sec)
Scanning Timeout (sec)
Device Name
Location
LLTD Settings
Items
Enable LLTD
Device Name
LLMNR Settings
Items
Enable LLMNR
LPR Settings
Items
Allow LPR Port Printing
>
Advanced Security Settings
Setting value and Description
Set whether to use Wide-Area Bonjour.
Setting value and Description
Select this to enable the iBeacon transmission function.
Setting value and Description
Select this to enable the SLP function.
This is used such as network searching in EpsonNet Config.
Setting value and Description
Select this to enable adding devices using WSD, and print
and scan from the WSD port.
Enter the communication timeout value for WSD printing
between 3 to 3,600 seconds.
Enter the communication timeout value for WSD scanning
between 3 to 3,600 seconds.
Displays the WSD device name.
Displays the WSD location name.
Setting value and Description
Select this to enable LLTD. The printer is displayed in the
Windows network map.
Displays the LLTD device name.
Setting value and Description
Select this to enable LLMNR. You can use name resolution
without NetBIOS even if you cannot use DNS.
Setting value and Description
Select to allow printing from the LPR port.
530
>
Controlling Using Protocols
Advertisement
Table of Contents
