Table of Contents
Advertisement
Product Information
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or select a font other than a
BarCode Font and input the space. If a space is input while a GS1-128(EAN128) font is selected, the bar code
will not be correct.
Character type
Number of characters
Font size
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Start/Stop character
❏ FNC1 character
It inserts for discernment from Code128 and for a pause of the variable length application identifier.
❏ Check digit
❏ Change code set character
Print sample
EPSON EAN128
Regulatory Information
Standards and Approvals
Standards and Approvals for U.S. Model
Safety
EMC
>
>
Regulatory Information
Alphanumeric characters (A to Z, 0 to 9)
Parenthesis are only for identification of the Application Identifier (AI)
Only the capital letters are supported by the small letter key input.
It changes with the Application Identifier (AI).
01: 4 characters "(01)" and 13 numbers
17: 4 characters "(17)" and 6 numbers
10: 4 characters "(10)" and maximum of 20 alphanumeric characters
30: 4 characters "(30)" and maximum of 8 numbers
36 pt or more
Recommended sizes are 36 pt, 72 pt
UL60950-1
CAN/CSA-C22.2 No.60950-1
FCC Part 15 Subpart B Class B
CAN ICES-3 (B)/NMB-3 (B)
Standards and Approvals
434
Advertisement
Table of Contents
