Table of Contents
Advertisement
Using Optional Items
Installing an Ethernet Board
Caution:
!
Make sure you turn off the power, unplug the power cord, and check that all wiring has been disconnected. The cord
may be damaged, resulting in electric shock or fire.
Important:
c
Electrostatic discharge can damage printer parts. Make sure you discharge static electricity from your body by
touching grounding yourself before installing the ethernet board.
1. Turn off the printer by pressing the
2. Disconnect all cables such as the power cord and USB cable.
3. Loosen the two screws and then remove the cover.
4. Install the ethernet board straight into the additional interface slot for the ethernet board.
Insert the ethernet board firmly into the slot.
>
Ethernet Board (10/100/1000 Base-T, Ethernet)
P
button.
348
>
Installing an Ethernet Board
Advertisement
Table of Contents
