Epson WorkForce Pro WF-C879RBAM User Manual page 535

Administrator Information
9. Send the CSR to a certificate authority and obtain a CA-signed Certificate.
Follow the rules of each certificate authority on sending method and form.
10. Save the issued CA-signed Certificate to a computer connected to the printer.
Obtaining a CA-signed Certificate is complete when you save a certificate to a destination.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&
CSR Setting Items
Items
Key Length
Common Name
Organization/ Organizational Unit/
Locality/ State/Province
Country
Sender's Email Address
Related Information
"Obtaining a CA-signed Certificate" on page 534
&
Importing a CA-signed Certificate
Import the obtained CA-signed Certificate to the printer.
>
Advanced Security Settings
Select a key length for a CSR.
You can enter between 1 and 128 characters. If this is an IP address, it should be a
static IP address. You can enter 1 to 5 IPv4 addresses, IPv6 addresses, host names,
FQDNs by separating them with commas.
The first element is stored to the common name, and other elements are stored to
the alias field of the certificate subject.
Example:
Printer's IP address : 192.0.2.123, Printer name : EPSONA1B2C3
Common Name : EPSONA1B2C3,EPSONA1B2C3.local,192.0.2.123
You can enter between 0 and 64 characters in ASCII (0x20-0x7E). You can divide
distinguished names with commas.
Enter a country code in two-digit number specified by ISO-3166.
You can enter the sender's email address for the mail server setting. Enter the
same email address as the Sender's Email Address for the Network tab > Email
Server > Basic.
When creating a CSR by selecting the Network Security tab > S/MIME > Client
Certificate, this setting is not required because the sender's email address for the
mail server setting is set automatically. Configure the sender's email address for
the mail server settings in advance.
535
>
Using a Digital Certificate
Settings and Explanation