Table of Contents
Advertisement
Administrator Information
2. Import the certificate in Client Certificate.
If you have already imported a certificate published by a Certification Authority, you can copy the certificate
and use it in IPsec/IP Filtering. To copy, select the certificate from Copy From, and then click Copy.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&
"Configuring a CA-signed Certificate" on page 534
&
"Configuring a CA Certificate" on page 539
&
Connecting the Printer to an IEEE802.1X Network
Configuring an IEEE802.1X Network
When you set IEEE802.1X to the printer, you can use it on the network connected to a RADIUS server, a LAN
switch with authentication function, or an access point.
1. Access Web Config and then select the Network Security tab > IEEE802.1X > Basic.
2. Enter a value for each item.
If you want to use the printer on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
Note:
You can share settings between Ethernet and Wi-Fi.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The printer is updated.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&
IEEE802.1X Network Setting Items
Items
IEEE802.1X (Wired LAN)
IEEE802.1X (Wi-Fi)
Connection Method
>
Advanced Security Settings
You can enable or disable settings of the page (IEEE802.1X > Basic) for IEEE802.1X (Wired
LAN).
The connection status of IEEE802.1X (Wi-Fi) is displayed.
The connection method of a current network is displayed.
553
>
Connecting the Printer to an IEEE802.1X Network
Settings and Explanation
Advertisement
Table of Contents
