Epson WorkForce Pro WF-C879RBAM User Manual page 554

Administrator Information
Items
EAP Type
User ID
Password
Confirm Password
Server ID
Certificate Validation
Anonymous Name
Encryption Strength
Related Information
"Configuring an IEEE802.1X Network" on page 553
&
Configuring a Certificate for IEEE802.1X
Configure the Client Certificate for IEEE802.1X. When you set it, you can use EAP-TLS and PEAP-TLS as an
authentication method of IEEE802.1x. If you want to configure the certification authority certificate, go to CA
Certificate.
1. Access Web Config and then select the Network Security tab > IEEE802.1X > Client Certificate.
2. Enter a certificate in the Client Certificate.
If you have already imported a certificate published by a Certification Authority, you can copy the certificate
and use it in IEEE802.1X. To copy, select the certificate from Copy From, and then click Copy.
>
Advanced Security Settings
Select an option for an authentication method between the printer and a RADIUS server.
EAP-TLS
PEAP-TLS
EAP-TTLS
PEAP/MSCHAPv2
Configure an ID to use for an authentication of a RADIUS server.
Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters.
Configure a password to authenticate the printer.
Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters. If you are using a Windows server as a
RADIUS server, you can enter up to 127 characters.
Enter the password you configured for confirmation.
You can configure a server ID to authenticate with a specified RADIUS server. Authenticator
verifies whether a server ID is contained in the subject/subjectAltName field of a server
certificate that is sent from a RADIUS server or not.
Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters.
You can set certificate validation regardless of the authentication method. Import the
certificate in CA Certificate.
If you select PEAP-TLS, EAP-TTLS or PEAP/MSCHAPv2 for EAP Type, you can configure an
anonymous name instead of a user ID for a phase 1 of a PEAP authentication.
Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters.
You can select one of the followings.
High
Middle
554
>
Connecting the Printer to an IEEE802.1X Network
Settings and Explanation
You need to obtain and import a CA-signed certificate.
You need to configure a password.
AES256/3DES
AES256/3DES/AES128/RC4