Epson WorkForce Pro WF-C879RBAM User Manual page 449

Administrator Information
3. Check the settings, and then click OK.
Setting Errors
Set the displaying error for the device.
1. Access Web Config and select the Print tab > Error Settings.
2. Set each item.
❏ Paper Size Notice
Set whether to display an error on the control panel when the paper size of the specified paper source is
different from the paper size of the print data.
❏ Paper Type Notice
Set whether to display an error on the control panel when the paper type of the specified paper source is
different from the paper type of the print data.
❏ Auto Error Solver
Set whether to automatically cancel the error if there is no operation on the control panel for 5 seconds
after displaying the error.
3. Check the settings, and then click OK.
Setting Universal Print
Set when you print from external devices without using the printer driver.
Some items are not displayed depending on the printing language of your printer.
1. Access Web Config and select the Print tab > Universal Print Settings.
2. Set each item.
3. Check the settings, and then click OK.
Basic
Items
Top Offset(-30.0-30.0mm)
Left Offset(-30.0-30.0mm)
Top Offset in Back(-30.0-30.0mm)
Left Offset in Back(-30.0-30.0mm)
Check Paper Width
Skip Blank Page
>
Settings to Use the Printer
Sets the vertical position of the paper on which printing starts.
Sets the horizontal position of the paper on which printing starts.
Sets the vertical position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Sets the horizontal position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Set whether to check paper width when printing.
If there is a blank page in the print data, set not to print a blank page.
449
>
Using the Print Functions
Explanation