Table of Contents
Advertisement
Using Optional Items
Cannot Use the LDAP Server
The network with the LDAP server is not selected correctly.
The LDAP server on either the standard or additional network is available. Make sure that the network that has the
LDAP server you want to use is selected correctly.
Related Information
"Selecting a Network that has an LDAP Server (When Using an Additional Network)" on page 353
&
Menu Options for Network Settings (When Using an Additional
Network)
This section explains the Network Settings menu when using the additional network.
Select the menus on the control panel as described below.
Settings > General Settings > Network Settings
Standard:
Set up the standard network. See Related Information below.
Related Information
"Network Settings" on page 384
&
Additional:
Set up the additional network.
Network Status:
Displays or prints the current network settings.
❏ Wired LAN Status
❏ Print Status Sheet
Advanced:
Make the following detailed settings.
❏ TCP/IP
❏ IPv6 Address
❏ Link Speed & Duplex
❏ Redirect HTTP to HTTPS
❏ Disable IPsec/IP Filtering
❏ Disable IEEE802.1X
You need to enter the administrator password for the additional network.
>
Ethernet Board (10/100/1000 Base-T, Ethernet)
355
>
Menu Options for Network Settings (
...
Advertisement
Table of Contents
