Table of Contents
Advertisement
Faxing (Fax-Capable Printers Only)
Related Information
"Checking the Status or Logs for Fax Jobs" on page 159
&
Sending Faxes in Monochrome at Specified Time of the Day (Send Fax Later)
You can set to send a fax at a specified time. Only monochrome faxes can be sent when the time to send is
specified.
Accessing the Menu
You can find the menu on the printer's control panel below.
Fax > Fax Settings
Enable Send Fax Later, and then specify the time of day to send the fax.
Note:
To cancel the fax while the printer is waiting for the specified time to arrive, cancel it from
Related Information
"Checking the Status or Logs for Fax Jobs" on page 159
&
Sending Different Size Documents Using ADF (Continuous Scan(ADF))
Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document
at their original sizes.
If you place different sized originals in the ADF, all of the originals are sent at the largest size among them. To send
originals at their original sizes, do not place originals with mixed sizes.
1. Place the first batch of originals at the same size.
2. Select Fax on the home screen.
3. Specify the recipient.
4. Select the Fax Settings tab, and then tap Continuous Scan(ADF) to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
5. Tap
x
(Send).
6. When scanning the first set of originals is complete and a message is displayed on the control panel asking you
to scan the next set of originals, set the next originals, and then select Start Scanning.
Note:
If you leave the printer untouched for the time set in Wait Time for Next Original after you have been prompted to set
the next originals, the printer stops storing and starts sending the document.
>
Sending Faxes Using the Printer
140
>
Various Ways of Sending Faxes
.
Advertisement
Table of Contents
