Table of Contents
Advertisement
Solving Problems
The back of the paper was printed before the side that had already been printed was dry.
Solutions
When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the
paper.
When printing using automatic 2-sided printing, the print density is too high and the drying
time is too short.
Solutions
When using the automatic 2-sided printing feature and printing high density data such as images and
graphs, set the print density to lower and the drying time to longer.
"Printing on 2-Sides" on page 57
&
"Printing on 2-Sides" on page 83
&
Printed Photos are Sticky
The print was made on the wrong side of the photo paper.
Solutions
Make sure you are printing on the printable side. When printing on the wrong side of the photo paper,
you need to clean the paper path.
"Cleaning the Paper Path for Ink Smears" on page 175
&
Images or Photos are Printed in Unexpected Colors
The following causes can be considered.
The print head nozzles may be clogged.
Solutions
Use the Print Quality Adjustment feature. If you have not used the printer for a long time, the print head
nozzles may be clogged and ink drops may not be discharged.
"Adjusting the Print Quality" on page 171
&
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
276
Print Quality is Poor
Advertisement
Table of Contents
