Epson WorkForce Pro WF-C879RBAM User Manual page 273

Table of Contents

Solving Problems

The paper type setting does not match the paper loaded.

Select the appropriate paper type setting for the type of paper loaded in the printer.

"List of Paper Type" on page 38

The print head position is out of alignment.

Align the print head using the Print Quality Adjustment feature.

"Adjusting the Print Quality" on page 171

The print quality is set to low.

When printing on plain paper, print using a higher quality setting.

❏ Control panel

Select Best as the Quality on the Advanced tab in print settings.

Select High from Quality on the printer driver's Main tab.

Select Fine as Print Quality from the print dialog's Print Settings menu.

Blurry Prints, Vertical Banding, or Misalignment

The following causes can be considered.

The print head position is out of alignment.

Align the print head using the Print Quality Adjustment feature.

"Adjusting the Print Quality" on page 171

The bidirectional printing setting is enabled.

If print quality does not improve even after aligning the print head, disable the bidirectional setting.

Printing, Copying, Scanning, and Faxing Quality is Poor

Print Quality is Poor