Set Mode; General - Icom IC-P7A Instruction Manual

10

SET MODE

■ General

Set mode is used for programming infrequently changed val-
ues or conditions of functions.
In addition, the IC-P7A has an expanded set mode which is
used for programming even more infrequently changed val-
ues or conditions of functions. When turning the expanded
set mode OFF, only half of the set mode items are displayed
for simple operation.
D D Set mode entering and operation
qWhile pushing and holding [FUNC], push and hold
) for 1 sec. to enter set mode.
[SQL] ( •
ATT SET
w Rotate [DIAL] to select the desired item.
eWhile pushing and holding [FUNC], rotate [DIAL] to select
the desired value or condition.
rPush [SQL] (
•
ATT SET
select another set mode item.
SET
49
) to exit set mode, or rotate [DIAL] to
[DIAL]
SCAN
S.MW
SET
D D Expanded set mode ON/OFF
qWhile pushing and holding [FUNC], push and hold
) for 1 sec. to enter set mode.
[SQL] ( •
ATT SET
w Rotate [DIAL] to select "EXPAND."
WFMAM - DUP T SQL DTCS ATT
After
1 sec.
VOL PRIO P SKIP MR
LOW
1 5 9
eWhile pushing and holding [FUNC], rotate [DIAL] to turn
the expanded set mode ON and OFF.
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Expanded set mode OFF
r Rotate [DIAL] to select the desired item.
tWhile pushing and holding [FUNC], rotate [DIAL] to select
the desired value or condition.
yPush [SQL] (
) to exit set mode, or rotate [DIAL] to
•
ATT SET
select another item.
Push Push and hold
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Expanded set mode ON
Dual operation