Skip Channel/Frequency Setting - Icom IC-P7A Instruction Manual

7
SCAN OPERATION

■ Skip channel/frequency setting

You can set the selected memory channel as a skip channel
which is skipped during memory skip scan. In addition, it can
be set as a skip channel for both memory skip scan and fre-
quency skip scan. These are useful to speed up the scan in-
terval.
q Select a memory channel:
➥ Push [V/M] (
SKIP
➥ Rotate [DIAL] to select the desired channel to be a skip
channel/frequency.
SCAN
S.MW
S.MW
SET
wPush and hold [V/M] (
memory write mode.
39
• . ) to select memory mode.
S MW
[DIAL]
WFMAM - DUP
T SQL
VOL PRIO PSKIP
LOW 1 5 9
) for 1 sec. to enter select
• .
SKIP S MW
ePush [CALL] (
• While pushing and holding [CALL] (
can also select "SKIP."
SCAN
DTCS ATT
MR
rRotate [DIAL] to select the skip condition from "SKIP,"
"PSKIP" or "OFF" for the selected channel.
• OFF : The channel or programmed frequency is scanned dur-
ing any scan.
• SKIP : The channel is skipped during memory or bank scan.
• PSKIP : The channel is skipped during memory/bank scan and
the programmed frequency is skipped during VFO scan,
such as programmed scan.
Push
• ) several times to select "SKIP."
MODE SCAN
•
MODE SCAN
• Skip setting
[DIAL]
WFMAM - DUP
VOL PRIO P SKIP
LOW
1
WFMAM - DUP
SCAN
S.MW
VOL PRIO P SKIP
LOW
1
SET
Setting indication
Push and hold Dual operation
), rotating [DIAL]
T SQL DTCS ATT
MR
5 9
After 1 sec.
T SQL DTCS ATT
MR
5 9