Table of Contents
Advertisement
10
SET MODE
D D Dial select step
Select the tuning step while pushing and
holding [FUNC] from 100 kHz, 1 MHz (de-
fault) and 10 MHz.
WFMAM - DUP
T SQL
DTCS
VOL PRIO P SKIP
MR
LOW
1
5
9
1 MHz step
D D Offset frequency
Sets the offset frequency for duplex (re-
peater) operation for each frequency band in-
dependently within 0 to 159.995 MHz range.
During duplex operation (–DUP or +DUP),
the offset frequency shifts the transmit fre-
quency (or while [SQL] (
WFMAM - DUP
T SQL
DTCS
VOL PRIO P SKIP
MR
LOW
1
5
9
The default value may differ according to the selected fre-
quency band
(before accessing set mode)
sion.
The selected tuning step in VFO mode is used for setting
the offset frequency.
53
ATT
WFMAM - DUP
T SQL
DTCS
VOL PRIO P SKIP
MR
LOW
1
5
9
100 kHz step
) is pushed).
•
ATT
SET
WFMAM - DUP
ATT
T SQL
DTCS
VOL PRIO P SKIP
MR
LOW
1
5
9
and transceiver ver-
D D Tone selection
Sets the tone encoder, tone squelch or DTCS
squelch operation and pocket beep capabil-
ity, when waiting for the desired signal.
• OFF
ATT
• TONE : Using tone encoder. Some repeaters require
• TSQL
• P BEEP : In addition to the "TSQL" setting, alert beeps
• DTCS
• P DTCS : In addition to the "DTCS" setting, alert beeps
ATT
WFMAM - DUP
VOL PRIO P SKIP
LOW
1
Tone squelch operation
The subaudible tone frequency and DTCS code are pro-
grammed as the tone frequency and DTCS code items, re-
spectively.
: Regular noise squelch operation. (default)
subaudible tones to be accessed.
: Using tone squelch. The squelch opens only
when a signal with matched subaudible tone is
received.
will sound when a signal with matched tone is
received.
: Using DTCS squelch. The squelch opens only
when a signal with matched DTCS code is re-
ceived.
will sound when a signal with matched DTCS
code is received.
WFMAM - DUP
T SQL
DTCS
ATT
VOL PRIO P SKIP
MR
5
9
LOW
1
DTCS squelch operation
T SQL
DTCS
ATT
MR
5
9
Advertisement
Table of Contents
