Table of Contents
Advertisement
16
POCKET GUIDE
81
■ Memory bank channel selection
q
Push [V/M] to select memory
mode .
w
Push [BAND] several times, or
while
pushing
and
holding
[BAND], rotate [DIAL] to select
the desired bank group.
e
Rotate [DIAL] to select the de-
sired bank channel.
■ Call channel selection
q
Push [CALL] to select call
channel mode .
w
Rotate [DIAL] to select the de-
sired call channel.
• Push [CALL] again or push [V/M] to
return to the previous condition.
■ Memory channel programming
q
Set the desired frequency and
other functions in VFO mode .
w
Push and hold [V/M] for 1 sec.
to enter select memory write
mode .
• 1 short and 1 long beeps sound.
e
Rotate [DIAL] to select the de-
sired memory channel number.
r
Push and hold [V/M] for 1 sec.
again to program the contents
into the selected channel.
• 3 beeps sound.
■ Scan skip setting
q
Push [V/M] to select memory
mode .
w
Rotate [DIAL] to select the de-
sired memory channel.
e
While pushing and holding
[FUNC], push [V/M] to set the
skip setting (skip channel or
skip frequency) ON and OFF.
■ VFO scans
q
Push [V/M] to select VFO
mode .
w
Push and hold [CALL] for 1 sec.
• One of scan type "ALL," "BAND" or
"PROG xx" (xx= 0–24) appears.
e
Rotate [DIAL] to select the de-
sired scan type. Push [CALL]
again to start the scan.
• Rotate [DIAL] to change the scan-
ning direction.
• During scan, push [V/M] to start auto
memory write scan.
r
Push [CALL] again to stop the
scan.
■ Memory scans
q
Push [V/M] to select memory
mode .
w
Push and hold [CALL] for 1 sec.
• One of scan type "M ALL," "B ALL,"
"B LINK" or "BANK"
appears, if
memory banks are assigned.
e
Rotate [DIAL] to select the de-
sired scan type. Push [CALL]
again to start the scan.
• Rotate [DIAL] to change the scan-
ning direction.
r
Push [CALL] again to stop the
scan.
Advertisement
Table of Contents
