Memory Bank Setting - Icom IC-P7A Instruction Manual

6
MEMORY/CALL CHANNELS

■ Memory bank setting

The IC-P7A has a total of 18 banks
. Regular memory channels, 000 to 999, may assigned
and Y)
into a desired bank for easy memory management.
qPush and hold [V/M] (
memory write mode.
• 1 short and 1 long beep sound.
• " " indicator and memory channel number blink.
w Rotate [DIAL] to select the desired memory channel.
eWhile pushing and holding [CALL] (
[DIAL] to select "BANK."
• After releasing [CALL] (
stead of the frequency indication, and only "
• Bank group and channel number is displayed if the selected
memory channel has already been assigned to a bank.
• "BANK" can can also be selected by pushing [CALL]
) several times.
( •
MODE SCAN
SCAN
SCAN
S.MW
S.MW
SET
25
(A to H, J, L, N, O to R, T, U
) for 1 sec. to enter select
• .
SKIP S MW
• ), rotate
MODE SCAN
), "-- -- -- --" is displayed in-
•
MODE SCAN
" indicator blinks.
[DIAL]
WFMAM - DUP DTCS ATT
T SQL
VOL PRIO P SKIP MR
LOW
1 5 9
After [CALL]
released
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 9
1 5
rWhile pushing and holding [BAND] (
[DIAL] to select the desired bank.
• Banks A to H, J, L, N, O to R, T, U and Y are available.
• The bank can also be selected by pushing [BAND] (
several times.
Bank is selected with
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 9
1 5
t Rotate [DIAL] to select the desired bank channel number.
• Vacant bank channel numbers are only be displayed.
Bank channel is selected with
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
yPush and hold [V/M] (
SKIP
nel into the bank.
• Return to the previous indication.
• ), rotate
TS LOCK
•
TS LOCK
+
) for 1 sec. to set the chan-
• .
S MW
)