Selecting A Memory Channel; Selecting A Call Channel - Icom IC-P7A Instruction Manual

■ Selecting a memory channel

qPush [V/M] (
) momentarily to select memory
• .
SKIP S MW
mode.
• " " appears when a memory channel is selected.
w Rotate [DIAL] to select the desired memory channel.
• Only programmed memory channels can be selected.
• While pushing and holding [FUNC], rotate [DIAL] to select a
memory channel in 10 channel steps, blank channels can be se-
lected in this case.
SCAN
S.MW
S.MW
SET
Push Push and hold
[DIAL]
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
[DIAL] changes the mem-
ory channel.
Dual operation
FREQUENCY AND CHANNEL SETTING

■ Selecting a call channel

qPush [CALL] (
•
MODE SCAN
channel.
wRotate [DIAL] to select the desired call channel.
SCAN
SCAN
S.MW
SET
ePush [CALL] (
•
MODE SCAN
tarily to return to the previously selected mode.
• Call channel example (depends on version)
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
144 MHz band
) momentarily to select a call
[DIAL]
) or [V/M] ( ) momen-
• .
SKIP S MW
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
440 MHz band
3
3
12