Icom IC-P7A Instruction Manual page 69

D D Key lock effect
While the key lock function is ON, [Y Y ]/[Z Z ] and
) can still be accessed. Accessible keys can
[SQL] ( •
ATT SET
be set to one of 4 groups.
[PWR] and [FUNC]+[BAND] (
during the lock, however, these keys are not effected by this
setting.
• NORMAL : [Y Y ]/[Z Z ] and [SQL] (
(default)
• NO SQL : [SQL] (
•
ATT SET
• NO VOL : [Y Y ]/[Z Z ] are accessible.
• ALL : No accessible key is available, except [PWR]
and [FUNC]+[BAND] (
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Normal lock condition
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Audio output can be adjusted
) are also accessible
•
TS LOCK
• ) are accessible.
ATT SET
) is accessible.
• ).
TS LOCK
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Squelch level can be adjusted
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Transceiver power and lock
function only switchable
D D Dial speed acceleration
The dial speed acceleration automatically
speeds up the tuning dial speed when rotating [DIAL] rapidly.
• ON : The dial speed acceleration is tuned ON.
(default)
• OFF : The dial speed acceleration is turned OFF.
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
The acceleration ON
D D Monitor key action
The monitor key, [SQL] (
ATT
as a 'sticky' key. When set to the sticky condition, each push
of [SQL] ( ) toggles the monitor function ON and OFF.
•
ATT SET
• PUSH: Pushing and holding [SQL] (
the frequency. (default)
• HOLD : Push [SQL] (
ATT
frequency and push momentarily again to cancel it.
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Monitor key activates
as PUSH function key.
Push and hold [SQL] to monitor Push to monitor
10
SET MODE
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
The acceleration OFF
), can be set
•
SET
) to monitor
•
ATT SET
) momentarily to monitor the
•
SET
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Monitor key activates
as HOLD function key.
10
56