Selecting Display Type - Icom IC-P7A Instruction Manual

■ Selecting display type

During memory mode operation, the programmed memory
name, bank name or the channel number can be displayed
instead of the frequency at your preference.
SCAN
S.MW
SET
When no memory or bank
name is programmed with the
selected memory channel,
frequency is displayed on the
function display.
q Push [V/M] (
) to select memory mode.
• .
SKIP S MW
• [BAND] ( • ) to select the desired bank.
TS LOCK
wWhile pushing and holding [FUNC], push [BAND]
( • ) momentarily to select display type from fre-
TS LOCK
quency, bank name, memory name and channel number
display.
- DUP
WFMAM T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Push [BAND] momentarily
while pushing [FUNC]
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
- DUP
WFMAM T SQL DTCS ATT
VOL PRIO P SKIP
MR
LOW 1 5 9
- DUP
WFMAM T SQL DTCS ATT
VOL PRIO P SKIP
MR
LOW
1 5 9
MEMORY/CALL CHANNELS
D D Selecting bank channel indication
During bank channel operation, the bank channel number can
also be displayed instead of the memory channel number in-
dication.
Memory channel No. indication
- DUP
WFMAM T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Push [BAND]
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
Auto write channel No.
➥ After selecting channel number indication as described at
left, push [BAND] ( •
TS LOCK
Or while pushing and holding [BAND] (
[DIAL] to select the desired bank.
Push Push and hold
6
Bank channel No. indication
- DUP
WFMAM T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
Bank channel No. indication
) to select the desired bank.
), rotate
•
TS LOCK
Dual operation
6
28