Priority Watch; Priority Watch Types - Icom IC-P7A Instruction Manual

Vhf/uhf dual band fm transceiver
Hide thumbs Also See for IC-P7A:
Table of Contents

Advertisement

■ Priority watch types

Priority watch checks for signals on a frequency every 5 sec.
while operating on a VFO frequency or scanning. The trans-
ceiver has 3 priority watch types to suit your needs.
The watch resumes according to the selected scan resume
condition. See the page at left for details.
NOTES:
If the pocket beep function is activated, the transceiver au-
tomatically selects the tone squelch function when priority
watch starts.
D D About priority beep function
When receiving a signal on the priority frequency, you can be
alerted with beeps and a blinking "S." This function can be
activated when setting the priority watch function ON.
Push
Push and hold
MEMORY CHANNEL WATCH
While operating on a VFO fre-
quency, priority watch checks for
a signal on the selected memory
channel every 5 sec.
• A memory channel with skip infor-
mation can be watched.
MEMORY SCAN WATCH
While operating on a VFO fre-
quency, priority watch checks for
signals on each memory chan-
nel in sequence.
• The memory skip function and/or
memory bank scan is useful to
speed up the scan.
VFO SCAN WATCH
While scanning in VFO mode,
priority watch checks for signals
on the selected memory chan-
nel every 5 sec.
Dual operation

PRIORITY WATCH

8
5 sec.
VFO
Memory
frequency
channel
5 sec.
Mch 000
Mch 001
SKIP
VFO
Mch 001
frequency
Mch 999
5 sec.
VFO
Memory
scan
channel
7
8
42

Advertisement

Table of Contents
loading

Table of Contents