Other Functions; Weather Channel Operation - Icom IC-P7A Instruction Manual

■ Weather channel operation

D D Weather channel selection
q Select VFO mode with [V/M] (
wPush [BAND] (
) several times, or while pushing
•
TS LOCK
and holding [BAND] (
•
TS LOCK
weather channel group.
e Rotate [DIAL] to select the desired weather channel.
SCAN
S.MW
SET
rPush [BAND] (
• ) to change frequency band, or
TS LOCK
push [V/M] ( ) to select memory mode.
• .
SKIP S MW
Push Push and hold
• . ).
SKIP S MW
) rotate [DIAL] to select the
[DIAL]
Weather channel indication
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Dual operation

OTHER FUNCTIONS

D D Weather alert function
NOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the selected weather channel is moni-
tored once every 5 sec. for the announcement. When the alert
signal is detected, the "AL.T" and the WX channel are dis-
played alternately and sounds a beep tone until the transceiver
is operated. The previously selected (used) weather channel
is checked periodically during standby or while scanning.
q Select the desired weather channel.
w Turn the weather alert function ON in expanded set mode.
➥ While pushing and holding [FUNC], push and hold
) to enter set mode.
[SQL] ( •
ATT SET
➥ Rotate [DIAL] to select "WX ALT," then rotate [DIAL]
while pushing and holding [FUNC] to set ON.
➥ Push [SQL] (
) to exit set mode.
•
ATT SET
SCAN
S.MW
SET
SET
11
U.S.A. version only
10
11
[DIAL]
60