Getting Started; Safety Warnings; Electrostatic Discharge (Esd) Precautions - HP Vizualize,Visualize b2000 Supplementary Manual

1

Getting Started

The following important information must be adhered to for proper removal and
replacement of all Hewlett-Packard parts.

Safety Warnings

Removing the device cover may expose sharp edges in the equipment
WARNING
chassis. To avoid injury, use care when installing customer add-on
devices.
Before performing removal/replacement procedures, position the workstation
NOTE
on a cushioned flat, stable surface, such as a table top or workbench.
NOTE Installing the recommended HP replacement part in your B2000 workstation
does not affect the regulatory and safety classifications or approvals listed in
the original owner's guide.

Electrostatic Discharge (ESD) Precautions

To prevent damage to the B2000 workstation, observe all of the following ESD precautions
while performing removal and replacement procedures:
• Remove all ESD-generating materials from the work area in which you will remove and
replace the workstation field replaceable unit(s).
• Open the ESD materials provided with the replacement part kit. Unfold the black
conductive sheeting (antistatic mat) and place it under a corner of the workstation. See
Figure 1-1. on page 10.
9