Wrapping Up; Verifying System Operations - HP Vizualize,Visualize b2000 Supplementary Manual

3

Wrapping Up

This section contains information to help you confirm that your removal and replacement
procedure was successful. In some cases you will need to use specific HP-UX commands
and utilities to reconfigure the workstation to recognize the replacement part(s).

Verifying System Operations

To verify the system operation, follow these steps:
1. Reconnect the power cables and any other cables that were disconnected when opening
the workstation.
2. Reconnect all peripheral devices and their associated power cables.
3. Power-on the system (push the power button on the front panel).
If the system fails to boot or power up, refer to the Solving Problems chapter of the B2000
Owner's Guide.
If you have any questions, suggestions, or problems with our hardware or documentation,
please contact your designated Hewlett-Packard representative.
Returning the Defective Exchange Assembly
If the defective part is an exchange assembly, the return authorization documentation will
accompany the exchange part. Please return the authorization documentation, with the
defective part, to Hewlett-Packard. Non-exchange assemblies must be disposed of
responsibly.
85