HP Vizualize,Visualize b2000 Supplementary Manual page 20

Parts Replacement Procedures
Memory DIMMs
NOTE
When installing memory, you need to orient the notches on the bottom edge of
the DIMM card so that they are aligned with the keys on the DIMM connector.
See
DIMM cards backwards.
For referencing the DIMM loading sequence see the label on the chassis floor. See
Figure 2-5.
Figure 2-5. B2000 System Label
4. Press downward on the ejector tabs located on each side of the DIMM connector. See
This opens the connector for DIMM card insertion.
20
Figure 2-6
. The keyed DIMM connectors prevent you from installing the
Front of the
B2000
workstation
Memory Loading Sequence on
B2000 System Label
Figure 2-6
.
Chapter 2