Enter New Unit Id; Passwords; Reset Configuration - Rice Lake REVOLUTION 682 Synergy Plus Technical Manual

682 Synergy Plus

3.4.21 Enter New Unit ID

Entering a new Unit ID requires access to Setup mode
1. Navigate to the Configuration menu within the Setup menu.
2. Press or
3. Press .
Power Up Mode
4. Press or
5. Press . The current unit ID value displays with the on-screen keyboard.
6. Edit the value using the alphanumeric entry procedure
7. Press
Cancel
- Or -
Press softkey to save and exit when the value is correct.
Save
Once back to the menu, press

3.4.22 Passwords

The User and Setup menus and can be password protected. See
modes and what menus are included in each. Use the follow procedure to configure passwords:
1. Navigate to the Configuration menu within the Setup menu.
2. Press or
3. Press .
Power Up Mode
4. Press or
5. Press .
User
6. Press or
7. Press . The current password displays with the on-screen keyboard.
8. Edit the value using the alphanumeric entry procedure
9. Press
Cancel
- Or -
Press softkey to save and exit when the value is correct.
Save
10. Once back to the menu, press

3.4.23 Reset Configuration

Defaulting the 682 configuration requires access to Setup mode
1. Navigate to the Configuration menu within the Setup menu.
2. Press .
Default Configuration
3. Press .
No
4. Press .
Yes
5. Press or
6. Press twice to return to Weigh mode.
28 Visit our website
(Section 4.1 on page
until displays.
Program
displays.
until displays.
Unit ID
softkey to exit without saving.
to return to Weigh mode.
until displays.
Program
displays.
until displays.
Password
displays.
to navigate to the desired password.
softkey to exit without saving.
to return to Weigh mode.
displays.
displays.
to reset the configuration setting.
www.RiceLake.com
29).
Configuration
(Section 3.3.2 on page
Section 1.3 on page 2
Configuration
(Section 3.3.2 on page
(Section 4.1 on page
Configuration
displays.
displays.
OK
displays.
20).
for a description of the User and Setup
displays.
20).
29).
displays.