Customizing Print Formats; Non-Human Readable Characters - Rice Lake REVOLUTION 682 Synergy Plus Technical Manual

682 Synergy Plus
Token
Alert Format Tokens
<ERR> Alert error message (system-generated)
Format
GFMT GROSS<G><NL2><TD><NL>
NFMT GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N>
<NL2><TD><NL>
ACCFMT ACCUM <A><NL><DA> <TI><NL>
SPFMT <SCV><SP><SPM><NL>
HDRFMTn COMPANY NAME<NL>STREET ADDRESS<NL>CITY ST ZIP<NL2>
AUXFMT#n GROSS<G><NL2><TD><NL>
TRFMT REG ID: <TID>: <TR2> <TD><NL>
TRWINFMT <NL>ID<SP><TID><NL2>GROSS<SP><TR1><NL2><DA><SP><TI><NL>
TRWOUTFMT <NL6>ID<SP><TID><NL2>GROSS<TR1><NL>TARE<SP><TR2><NL>NET
<SP2><TR3><NL2><DA><SP><TI><NL>
NOTE: The 1,000 character limit of each print format string includes the output field length of the print formatting tokens,
not the token length. For example, if the indicator is configured to display a decimal point, the <G> token generates an
output field of 13 characters: the 10 character weight value (including decimal point), one space, and a two-digit units
identifier. For tokens with an x (e.g. <Gx> or <Gx#n>), total field length with unit identifier is x + 3.
PT (preset tare) is added to the tare weight if tare was keyed in.

13.2 Customizing Print Formats

The Gross , Net
(GFMT) (NFMT)
Truck , Truck Weigh-In
(TRFMT)
format menu via the front panel. See
menu the indicator must be in Setup mode
The print format menu via the front panel can be used to customize the print formats and to edit the print format strings with the
full keyboard that appears on the display when entering a format string. See
entry procedure to edit the print format strings.

13.3 Non-Human Readable Characters

ASCII characters 0 through 31 are non-human readable characters. To include a special character in a print format, the decimal equivalent
needs to be used. For example, the special character Esc would be <27> or 60, 50, 55, 62 (less the commas).
Examples of a print release command for a TMU295 in the GROSS format:
Print Format:
GROSS<G><NL2><TD><NL><27>q
In Revolution:
98 Visit our website
Table 13-1. Print Format Tokens (Continued)
Description
Table 13-2. Default Print Formats
Default Format String
, Accumulator , Setpoint
(ACCFMT)
and Truck Weigh-Out
(TRWINFMT)
Section 4.5.6 on page 45
(Section 4.1 on page
www.RiceLake.com
ALERT
Weigh mode – no tare in system
Weigh mode – tare in system
Accumulator demand print format string
Setpoint print operation with Push Print = ON
Header format strings (n=1-2)
Auxiliary print format strings (n=1-4)
Weigh mode – truck in/out applications
Weigh mode – truck in/out applications
Weigh mode – truck in/out applications
, Header
(SPFMT) (HDRFMT1-2)
formats can be customized using the print
(TRWOUTFMT)
for the print format menu structure. To access the print format
29).
Section 3.3.2 on page 20
Print Format:
GROSS<G><NL2><TD><NL><27><113>
In Revolution:
Supported Ticket Formats
When Used
, Auxiliary 1-4
(AUXFMT#1-4)
for the alphanumeric
,