Table of Contents
Advertisement
682 Synergy Plus
2.2
Mounting Instructions
The 682 includes a universal mount stand. The stand can be mounted on a wall, tabletop or a flat surface.
A
B
6.0 in (152.4 mm) 3.01 in (76.5 mm) 2.01 in (51.1 mm) Ø 1.5 in (38.1 mm) 3.0 in (76.2 mm)
NOTE: The universal mount stand comes attached to the 682. Rice Lake Weighing Systems recommends removing the
682 from the stand prior to mounting.
1. Using the mount as a template, mark the screw locations.
2. Drill holes for the screws.
3. Secure the universal mount using the appropriate 1/4-inch or M6 hardware (not included).
4. Reattach the 682 to the universal mount stand.
NOTE: The parts kit includes rubber grommets to insert into the four screw holes of the universal mount stand for a
non-mounted application.
4
Visit our website
Figure 2-2. Mounting Dimensions Diagram
A
B
C
Table 2-2. Mounting Dimensions
C
D
Figure 2-3. Mounting the Indicator
www.RiceLake.com
H
G
F
E
D
E
F
1.51 in (38.4 mm)
G
H
0.37 in (9.4 mm) Ø 0.28 in (7.1 mm)
Advertisement
Table of Contents
