Enter New Unit Id; Display Accumulator - Rice Lake Legend 480 Series Operation Manual

1.5.10 Enter New Unit ID

1. Press
MENU
2. Press to AUDIT.
3. Press until display reads UNIT ID.
4. Press to view the current value.
5. Edit the value using the following method; or with the 480PLUS, use the keypad.
• Press or to select the digit.
• Press or to increment or decrement the value.
6. Press
TARE
7. Press repeatedly to return to weighing mode.

1.5.11 Display Accumulator

1. Press
MENU
2. Press to AUDIT.
3. Press until display reads ACCUM.
4. Press to display VIEW.
5. Press or
• For VIEW, TIME or DATE, press
to selected parameter.
• To PRINT or CLEAR, press
Press to return to selected parameter
6. Press repeatedly to return to weighing mode.
If the accumulated value exceeds 999999, display show "EE ACC". The value
Note
will still be correct and will print correctly up to 1,000,000,000.
.
when the value is correct.
.
to select desired parameter (VIEW, TIME, DATE, PRINT, CLR Y).
to view the value. Press
, then press
© Rice Lake Weighing Systems ● All Rights Reserved
or
to print or clear the accumulator.
TARE
Introduction
to return
TARE
11