Preset Tare (Keyed Tare); Display A Stored Tare; Clear A Stored Tare; View Audit Trail Counters - Rice Lake REVOLUTION 682 Synergy Plus Technical Manual

682 Synergy Plus
3.4.7

Preset Tare (Keyed Tare)

Tare Function (Section 4.5.1 on page
1. Remove all weight from the scale and wait for
2. With the scale displaying zero weight, use the numeric keypad to enter the tare weight value and press
3. The display changes to net weight and Net is indicated on the display. A "PT" displays in the lower middle of the weight
display area, followed by the current Preset Tare weight.
NOTE: Press again while
3.4.8

Display a Stored Tare

1. Press .
Audit
2. Press or
3. Press .
Display Tare
4. Press . The stored tare value displays.
5. Press twice to return to Weigh mode.
NOTE: If there is not a tare in the system, the value displayed is zero.
3.4.9

Clear a Stored Tare

1. Press .
Audit
2. Press or
3. Press .
Display Tare
4. Press .
Clear Tare
5. Press or
6. Press twice to return to Weigh mode.

3.4.10 View Audit Trail Counters

The audit trail calibration and configuration counters can be viewed in User mode.
1. Press .
Audit
2. Press .
Legally Relevant Version
3. Press .
Calibration Counter
4. Press . The audit trail calibration counter number displays.
5. Press .
Calibration Counter
6. Press .
Configuration Counter
7. Press . The audit trail configuration counter number displays.
8. Press twice to return to Weigh mode.
22 Visit our website
32) must be set to Keyed Tare or Both for the preset tare feature to function.
displays, or enter a keyed tare of zero to remove the preset tare value.
displays.
until displays.
Tare
displays.
displays.
until displays.
Tare
displays.
displays.
to clear the stored tare value.
displays.
displays.
displays.
displays.
displays.
www.RiceLake.com
and to display.
displays.
OK
.