Table of Contents
Advertisement
682 Synergy Plus
3.0
Operation
The front panel consists of a full color LCD display with 0.5-in (12.7-mm) tall weight digits. The front panel also includes 24 flat
membrane panel, tactile feel buttons, which include six primary scale function buttons, a numeric keypad, five configurable
softkeys and a power button. The message area of the display can hold up to three lines of text, which can include process,
error or system messages.
3.1
Front Panel
This section provides an example of the 682 front panel and describes all the buttons and their functions.
Button
Turns the unit ON/OFF:
If ON, press and hold for eight seconds to turn unit OFF
If OFF, press and hold for two seconds to turn unit ON
The Menu button is used to access User mode. See
access Setup mode parameters.
Sets the current gross weight to zero, provided the amount of weight to be removed or added is within the specified zero range and the
scale is not in motion. The zero band is defaulted to 1.9% of full scale, but can be configured for up to 100% of full scale. Also used as the
up button to navigate menus.
Switches the weight display to an alternate unit. The alternate unit is defined in the Configuration menu, and could be kg, g, lb, oz, tn or t.
Also used as the left button to navigate menus or to toggle to another digit when editing a value.
Sends on-demand print format out the configured port, provided the conditions for standstill are met. RS232-1 is the default print port.
Also used as the right button to navigate menus or to toggle to another digit when editing a value.
Performs one of several predetermined tare functions dependent on the mode of operation selected in the TARE FN parameter.
Also acts as an enter button for numeric or parameter entry.
Switches the display mode from gross to net, or from net to gross. If a tare value has been entered or acquired, the net value is the gross
weight minus the tare. Used as the down button to navigate menus.
Clears current value in a numeric entry or clears the currently selected digit in an alphanumeric entry.
Configurable softkeys that can be set to perform a variety of functions. See
select the bottom row of keyboard options located above the softkeys.
18
Visit our website
Figure 3-1. Front Panel Example
10:35 AM
12/10/21
Scale 1
8888888
NET
PT 100 lb
Up to three lines of text can go
in this area. Up to three lines
of text can go in this area.
Softkey
Softkey
Softkey
Softkey
Table 3-1. Front Panel Buttons and Descriptions
www.RiceLake.com
lb
10000 lb x 1 lb
Softkey
Function
for more information on setting up the Menu button to
Section 4.1.1 on page 29
Section 3.4.19 on page 27
to configure softkeys. Also used to
Advertisement
Table of Contents
