View Audit Trail; Enter New Unit Id; Display Accumulator - Rice Lake 480 Legend Series Technical Manual

480 Legend Series Weight Indicator
1.8.9

View Audit Trail

See Section 3.1 on page 24
1. Press .
MENU
to AUDIT.
2. Press
3. Press . The audit trail CALIB is displayed.
4. Press then or
5. Press to view selected parameter.
6. Press twice to return to CALIB.
7. Press to the audit trail CONFIG and repeat
8. Press repeatedly to return to weighing mode.

1.8.10 Enter New Unit ID

1. Press .
MENU
to AUDIT.
2. Press
until display reads UNIT ID.
3. Press
4. Press to view the current value.
5. Edit the value using the following method; or with the 480 Plus, use the keypad, See
• Press or to select the digit
• Press or to increment or decrement the value
6. Press when the value is correct.
TARE
7. Press repeatedly to return to weighing mode.

1.8.11 Display Accumulator

1. Press .
MENU
to AUDIT.
2. Press
until display reads ACCUM.
3. Press
to display VIEW.
4. Press
5. Press or to select desired parameter (VIEW, TIME, DATE, PRINT, CLR Y).
i. For VIEW, TIME or DATE, press
ii. To print or clear, press
parameter
6. Press repeatedly to return to weighing mode.
See Section 3.1 on page 24
If the accumulated value exceeds 999999 then EE ACC displays. The value will still be correct and will print correctly
Note
up to 1,000,000,000.
www.RiceLake.com
8 Visit our website
for more information.
to CNT, TIME or DATE.
Step 5
to view the value; press
then press
for the ACCUM menu structure.
and Step 6 to view configuration number.
or
to print or clear the accumulator; press
TARE
Section 1.7 on page
to return to selected parameter
TARE
to return to selected
5.