View And Edit Time Value - Rice Lake REVOLUTION 682 Synergy Plus Technical Manual

682 Synergy Plus

3.4.15 View and Edit Time Value

To view and edit the current time:
1. Press .
Audit
2. Press .
User Menu
3. Press .
Calibration
4. Press or
5. Press to view the current set time.
Current
Selection Box
6. To edit the time value use the following method:
• and
• and
• Use available softkeys:
◦ – Exit without saving
Cancel
◦ – Switch to view date value
Date
◦ – Save and exit time value
Done
7. Once back to the menu, press
NOTE: Time is backed up by the internal battery and is not lost if the main power is interrupted.
See Section 4.5.5 on page 42
24 Visit our website
displays.
displays.
displays.
until displays.
Time
Figure 3-3. Set System Time
Set System Time (24 hour)
Hours (24) Minutes
:
1 0 3
Cancel
to move left and right through the time settings
to edit the currently highlighted time setting number
to return to Weigh mode.
for time formatting options.
www.RiceLake.com
Seconds
:
6 4 2
Date Done