Table of Contents
Advertisement
9.2.3
Client Configuration
The wireless module is configured to be a server by default, with the ability to accept the connection of a client to it.
• A Server is waiting to Accept a connection from a Client.
• A Client is looking to Connect to a remote Server (host).
The following procedure is for configuring the wireless module as a client, using the Web Manager, to be able to connect the
wireless module to an available server connection.
1. Refer to
Steps 1-6
2. Click Tunnel in the left navigation panel.
3. Click Connect towards the top of the Tunnel 1 Status page.
4. Use the drop-down to change the Mode setting, and then click [ Edit ] to display available Host 1 settings.
NOTE: The Web Manager provides notes and information related to the current page in the far right column. Descriptions
for options and settings are also provided when hovering over the item in question.
in
Section 9.2.1 on page 64
to sign in to the Web Manager.
© Rice Lake Weighing Systems ● All Rights Reserved
Wi-Fi & Bluetooth® Communications
69
Advertisement
Table of Contents
Need help?
Do you have a question about the REVOLUTION 682 Synergy Plus and is the answer not in the manual?
Questions and answers