Enter New Unit Id; View And Edit Time Value; View And Edit Date Value - Rice Lake Revolution 680 Synergy Plus Technical Manual

680 Synergy Plus – Digital Weight Indicator

3.4.15 Enter New Unit ID

Entering a new Unit ID requires access to setup mode
1. Press .
2. Press to AUDIT.
until display reads UNIT ID.
3. Press
4. Press to view the current value.
5. Edit the value using the keypad
6. Press when the value is correct.
7. Press to return to weigh mode.

3.4.16 View and Edit Time Value

To view and edit the current time:
1. Press . audit displays.
2. Press multiple times until time displays.
3. Press to view the current set time.
4. To edit the time value use the following method:
• Press to clear the current time
• Use the numeric keypad to enter the new time value
• Press to accept the new time value once correct
5. Press to return to weigh mode.
Time is backed up by the internal battery and is not lost if the main power is interrupted.
Note
See Section 4.4.5 on page 31

3.4.17 View and Edit Date Value

To view and edit the current date:
1. Press . audit displays.
2. Press multiple times until date displays.
3. Press to view the current set date.
4. To edit the date value use the following method:
• Press to clear the current date
• Use the numeric keypad to enter the new date value and press
5. Press to return to weigh mode.
Date is backed up by the internal battery and is not lost if the main power is interrupted.
Note
See Section 4.4.5 on page 31
20 Visit our website
(Section 4.1 on page
(Section 3.3.1 on page
for time formatting options.
for date formatting options.
www.RiceLake.com
22).
15).
to accept the desired value