Demounting And Remounting Of 6-Cell Holder - Hitachi U-5100 Instruction Manual

2.4.5 Demounting and Remounting of 6-cell Holder

The 6-cell holder is demounted when installing any accessory or
cleaning the sample compartment. Described below are the
procedures for demounting and remounting the holder.
a. Procedure for Demounting 6-cell Holder
(1) Loosen the hand screw at the center of the 6-cell
holder until being turned freely.
Fig. 2-14 Preparation for Demounting of
(2) Hold the 6-cell holder by the top and vertically pull it
out of the sample compartment.
Fig. 2-15 Demounting of 6-cell Holder
2 - 19
6-cell Holder
2.4.5
Hand screw
6-cell holder
6-cell holder