Hitachi U-5100 Instruction Manual page 46

2.4 Basic Operation
Table 2-4 Guidance on Cell Position in Use of Accessory
Guidance on
Cell Position
Single cell holder (optionally available)
CELL S
Rectangular long path cell holder (optionally
available)
Auto sipper (optionally available)
SIPPER
To display the Main Menu screen from another screen,
press the [MAIN MENU] key.
b. Measuring Condition Setting Screen
Described below is the basic operation of the measuring
condition setting screen when "Photometry" has been
selected on the Main Menu screen.
Photometry
1 Meas.PARAM.
2 Sample
3 Curve
4 Curve Data
5 6 Cell
6 System
7 Print
8 Save Method
9 Meas.Screen
Select function.:_
Fig. 2-10 Measuring Condition Setting Screen
Two methods are available for the setting of measuring
conditions. Select either of them from the perspective of
your ease of use, or use them in combination.
1. Use of [◄], [►], [▲] and [▼] keys
Each item on the screen can be selected with the [◄],
[►], [▲] and [▼] keys. For setting "3 Curve" for
example, move the cursor to "3 Curve" with the [▲] or
[▼] keys and press the [►] key to enable setting of
each item in "3 Curve". Set the conditions according
to the guidance. The cursor can be moved to the left
with the [◄] key.
2 - 14
In-use Accessory Indicated
CELL A
Data Mode CONC
No.of WL 1
WL1(nm) 600.0
Delay(s) 0