Hitachi U-5100 Instruction Manual page 250

4.3 Data Processing
3. Peak Detection Screen
(1) The peak detection screen (Fig. 4-41) is now opened.
The peak and valley detected according to the peak
parameters set for measurement are indicated by +
marks at the peak positions on the spectral profile.
When plural peaks and valleys have been detected,
you can move to different peak/valley by pressing the
[◄]/[►] key. The wavelength and photometric value
at the cursor position are indicated at the top left of this
screen. Also, the present peak detection parameters
are indicated at the right of the wavelength and
photometric value. For changing the peak/valley
detection parameters, select the <1> key (for Peak
PARAM.), and the <2> key (for Peak Table) for
displaying the peak table. For details of Peak PARAM.
and Peak Table, refer to Table 4-17.
WL Scan
546.0 nm 0.286 ABS (T = 0.010, S = 2)
0. 367
ABS
0.278
Select function. :_
[1]Peak PARAM. [2]Peak Table
Fig. 4-41 Peak Detection Screen
4 - 36
＋
＋
＋ ＋
＋
＋
400.0 500.0
CELL A
＋
600.0 nm