Hitachi U-5100 Instruction Manual page 206

3.3 Sample-by-sample Measurement (6-cell manual mode)
6. Saving of Measuring Conditions
GUIDE: When the set measuring conditions need not be
saved, proceed to step 7.
(1) To save the set measuring conditions, press the <5>
key (Save Method) and then [ENTER] key. Or select
"Save Method" with the [▲] or [▼] key and press the
[ENTER] key or [►] key.
(2) The measuring condition saving (Save Method) screen
(with saved data) (Fig. 3-97) appears.
Save Method
1 NO3-(Hitachi Taro)
2 Cr6+(Hitachi Hanako)
File name
File Name：_
File Name [Max: 20 characters]
Fig. 3-97 Measuring Condition Saving (Save Method)
Screen (with saved data)
(3) When other measuring conditions are saved in
advance, a list of saved measuring conditions appears
on the main menu. At this time, the file name,
measurement mode (PHT: Photometry, WLS:
Wavelength Scan, TMS: Time Scan) and saving date
are indicated.
(4) For the measuring conditions to be saved, enter a file
name within 20 characters and press the [ENTER] key.
3 - 142
CELL A
TMS 2010/10/10
TMS 2010/03/30
Saving
date
Measurement
mode
ABC ◄ ► ( 1/ 1)