Measurement With Enlarged Display Screen (Monitor) - Hitachi U-5100 Instruction Manual

3.4 Measurement with Enlarged Display Screen (monitor)

This instrument displays a photometric value in enlarged size on the monitor. This function
is effective in carrying out measurement while monitoring the photometric value at a
wavelength. Described below is the operating procedure for measurement with this function.
GUIDE: When auto start is specified, the system automatically sets up the conditions and
advances to the measurement screen phase of sequence after the power switch is
turned on. For how to specify auto start, refer to section 4.5..
1. Startup of This Product
Start this product. (For the starting procedure, refer to
section 2.3.1..)
2. Display of Main Menu
Press the [MAIN MENU] key. The Main Menu screen (Fig.
3-102) will then appear. To present the enlarged display
screen, press the <8> key (Monitor) and then [ENTER] key.
Or select "Monitor" with the [▲] or [▼]key and press the
[ENTER] key.
GUIDE:The enlarged display screen can also be presented
by pressing the [MEAS. SHIFT] key with the
[SHIFT] key held down.
Main Menu
1 Photometry
2 WL Scan
3 Time Scan
4 Method Menu
5 Data Menu
6 System Setup
7 Performance
8 Data Display
Select function. : _
Fig. 3-102 Main Menu Screen
3 - 147
3.4
CELL A