How To Input Characters - Hitachi U-5100 Instruction Manual

2.4.3 How to Input Characters

2. Use of numeric keys and [ENTER] key
Enter the number preceding the desired menu item
and press the [ENTER] key. For setting "3 Curve" for
example, enter <3> and press the [ENTER] key.
Then, set each item according to the operational
guidance and press the [ENTER]. To move the
cursor to the left, press the [RETURN] key.
Explained below is how to input characters. Character input is
done when entering the file name, sample name and
concentration unit.
a. Character Input Screen
Character input is done when entering the file name,
sample name and concentration unit. On each input
screen, the guidance shown in Fig. 2-11 appears. For the
file name, you can input up to 20 characters, and up to 8
characters for the sample name and concentration unit.
File Name：
File Name [Max: 20 characters]
ABC
File name input screen
Input character.:_
Sample Name[Max: 8 characters]
ABC
Sample name input screen
Input character.:_
Unit Label[Max: 8 characters]
ABC
Concentration unit input screen
Fig. 2-11 Character Input Screen
2 - 15
( 1/ 1)
Indication of character
input mode
ABC : Alphabet input
123 : Numeric input
2.4.3