Hitachi U-5100 Instruction Manual page 103

Setting Item
[2] Curve You can generate a calibration curve with the
measured standards and confirm it. When this
function is selected, the following screen appears.
For details of this function, refer to section 4.3.
[1] Scale :
[2] Factor :
[3] STD
[3] Save You can save the measured data. When this
function is selected, the following screen appears.
[1] Save :
[2] Sort :
3 - 39
Description
Photometry/Curve
R=0.9999 R2=0.9999
0.893
+
+
+
ABS
+
+
+
0.001
+
0.000 CONC
Select function. : _
□ Scale □ Factor □ STD
1 2 3
Allows you to change the scale of
calibration curve.
Indicates the factor, correlation
coefficient and determination coefficient
of calibration curve.
: Indicate the result of standard solution
measurement. Also allows
remeasurement of a standard solution,
deletion of a standard unnecessary for
generating a calibration curve and
retrieval of deleted data.
Save Data
1 NO3-(Hitachi Taro)
2 Cr6+(Hitachi Hanako)
Select function. : _
□ Save □ Sort
1 2
( 1/ 1)
Allows you to save data under a new file
name.
Allows you to rearrange the currently
saved data in the order of file names or
dates.
3.2.1
(cont'd)
CELL A
+
+
90.00
CELL A
PHT 2010/10/10
PHT 2010/03/30